10
11
RND 320-KEL Series
RND 320-KEL Series
4. The Storage Function of Steady State and Recalling
Note: The load can save and recall 100 sets of stationary setting values.
And to set the values, the number keys, knob and up & down buttons all
can be used.
4.1 Storage function
Operation Method: Taking 10.000V stored to 99 as example.
4.2 Recall Function
Operation method: taking recalling the stored steady-state value in 99
As example.
5. Ml-MS Fast Recall and Storage Function
5.1 Ml-MS Fast Recall Function
Note: By pressing Ml-MS, the steady state content stored in Ml-MS
can be quickly recalled.
5.2 Ml-MS Fast Storage Function
Note: You can change the content of Ml-MS by selecting Ml-MS
button; and then press the currently selected Ml-MS button to fast
save the value to the currently selected M key.
For example, the previous content of Ml is CV+15.001V and now
needing to modify as CV+14.000V, you can press Ml to recall the
content and then modify to 14.000V through rotating the knob and
then pressing the number keys to select the value you want. After
that, press Ml again to save it in Ml.
6. Short Circuit Function
Note: the load will make the tested equipment output the max current.
Operation Method:
7. Dynamic Test Function
Note: There are 6 setting functions in this mode: Dynamic CV, Dynamic CC,
Dynamic CR, Dynamic CW, Dynamic Pulse and Dynamic Flip. And this mode
has no storage function, so it can be only set first and then run.
7.1 Dynamic CV, Dynamic CR, & Dynamic CW
Description: used for the different duty cycle output of 2 different volt
ages at a certain frequency.
Operation Method:
Taking the first voltage lV, the second voltage 2V , the cycle frequency
lHZ and the duty cycle 40% as example; as for Dynamic CR and
Dynamic CW, just need to change the setting voltage into resistance or
power. And Dynamic CR selects mode 3 while Dynamic CW
selects mode 4.
