4
5
RND 320-KEL Series
RND 320-KEL Series
Safety Guidelines
• Do not block or obstruct the cooling fan vent opening
• Avoid severe impacts or rough handling that leads to damage.
• Do not discharge static electricity.
• Do not disassemble unless you are qualified as service personnel.
AC INPUT
• AC In
p
ut Voltage: 110V / 120V / 220V / 230V , 50 / 60 Hz
• Connect the protective grounding conductor of the AC power cord to an earth
ground, to avoid electrical shock.
Operation
Environment
• Location: Indoor, no direct sunlight, dust free, almost non-conductive pollution
(note below)
• Relative Humidity:< 80%
• Altitude: < 2000 m
• Temperature: 0-40
O
C
Storage
Environment
• Location: Indoor
• Relative Humidity: < 70%
• Temperature: -10-70”C-
MODEL
RND
320-KEL102
RND
320-KEL103
110V/120V
220V/230V
FUSE
• To ensure fire protection, replace the fuse only with the specified type
and rating.
• Disconnect the power cord before fuse replacement.
• Make sure the cause of fuse blow out is fixed before fuse replacement.
Introduction
RND KEL series (150W~300W), single-channel programmable DC
electronic loads, are designed for middle & high-end applications.
They can offer multiple solutions according to your needs.
The online voltage measures and adjusts, or simulate a short
circuit test, using the simple keypad on the front panel. RND
KEL series DC loads are versatile instruments for static and
dynamic testing of power supplies, batteries, DC DC converters,
and battery chargers, providing users the best testing
solution.
Main Features
• Highlight LED display
• 5digit displays, and accurate outputs
• Resolution of voltage and current: 0.1 mV / 0.1 mAProtection
and Over voltage Protection
• 100 groups of memories for fast recall
• Four working modes: CV/CC/CR/CP
• Remote Compensation Function
• Battery Test Function
• Key board Lock
• Power off memory function
• Short-circuit function
• Remote Compensation Function
• External Trigger Function
• Setting Function of Baud Rate
