10
Beep On / Off
Panel Operation
By default, the beep sound is enabled. To turn off he beep, press the OCP (BEEP)
button for 2 seconds. A beep comes out and the beep setting will be turned off.
To enable the beep, press the OCP (BEEP) button again for 2 seconds.
Front Panel Lock
Panel operation
Press the LOCK button to lock the front panel button operation. To unlock, press
the LOCK button for 2 seconds.
Output Set
Panel operation
1. Connecti ng the load to the front port, red( +),black ( -) .
2. Setting output voltage and current. Press the button Voltage/Current selecti
on to switch voltage adjustm ent and current adjustm ent. Adjusti ng voltage
and current with Voltage / Current Adjustm ent knob. By default, the Voltage
and Current knob work in the coarse mode. To acti vate the fine mode, press
the buttons to select the coarse mode or the fine mode.
3. Turning on the output and pressing the output button. The button LED turns
on and displays CV or CC mode.
Save Setup
Background
The front panel settings can be stored into one of the four internal memories.
