RMG TME400, Operating Manual

Page: 80 / 156

4 Operation
MANUAL TME400-VCF · EN08 · July, 01 st 2021
74
F04 Figure below
659 W
N
float
- - 0.0
F05 Figure above
661 W
N
float
- - 1000.0
F06 Current specification
663 W
N
float
0.0 25.0 12.0
mA
F07 Current moderation
665 W
N
float
0.0 0.99 0.7
I-D
F10 Calibration value 4mA
667 W
N
float
0.0 25.0 4.0
mA
F11 Calibration value 20mA
669 W
N
float
0.0 25.0 20.0
mA
F12 Module serial number 671 W N string8 - - 0000
0000
SN
4.3.3.7.
Error / type plate
Coordi-
nate
Name Description
G01 Current error Identifies the current error
G02 Software version Shows the version number of the firmware in the TME400.
G04 Serial number Serial number of the TME400
G05 Firmware checksum Shows the checksum of the firmware (important for TME400-VMF
and TME400-VCF in custody-transfer applications)
G06 Measuring point Possibility of numerical identification for the measuring point
G10 Standard pressure Display of the standard pressure setting
G11 Pressure range min. Display of the minimum of the pressure range
Value range of the pressure sensor
(
chapter 5.1.2.4 Pressure transducer
) or customer setting C04)
G12 Pressure range max. Display of the maximum of the pressure range
(
chapter 5.1.2.4 Pressure transducer
) or customer setting C05)
G13 Pressure sensor
serial number
Serial number of the pressure sensor
G14 Standard temperature
Display of the standard pressure setting
G17 Temperature sensor se-
rial number
Serial number of the temperature sensor
G18 Meter number Number of the turbine meter
G21 CRC metrological Param.
EEprom
CRC of metrological parameters EEprom
G23 Date of Battery Exchange Date of battery exchange
G24 Remaining Battery
Capacity
Remaining capacity of the battery
G25 Battery Change
0 No (default)
1 Yes
G26 Operating Hours Operating hours
G19 Meter size Meter size (G .. )
G20 Date of last battery re-
placement
Shows the date of the last battery replacement