background image

 

 

User's Guide QuadMic

 © RME

9

 

11. CE / FCC Compliance Statements

 

 

CE 

This device has been tested and found to comply with the limits of the European Council Direc-
tive on the approximation of the laws of the member states relating to electromagnetic compati-
bility according to RL2004/108/EG. 
 

 

FCC

 

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This equipment generates, uses, 
and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 
 
- Reorient or relocate the receiving antenna. 
- Increase the separation between the equipment and receiver. 
- Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 
- Consult the dealer or an experienced radio/TV technician for help. 
 
 

RoHS 

This product has been soldered lead-free and fulfils the requirements of the RoHS directive. 
 
 

ISO 9001 

This product has been manufactured under ISO 9001 quality management. The manufacturer, 
IMM Elektronik GmbH, is also certified for ISO 14001 (Environment) and ISO 13485 (medical 
devices). 
 
 
 
 

Note on Disposal 

 
According to the guide line RL2002/96/EG (WEEE – Directive on Waste 
Electrical and Electronic Equipment), valid for all european countries, 
this product has to be recycled at the end of its lifetime.  
 
In case a disposal of electronic waste is not possible, the recycling can 
also be done by IMM Elektronik GmbH, the manufacturer of the 
QuadMic. 
 
For this the device has to be sent 

free to the door

 to: 

 
 

IMM Elektronik GmbH 

 

Leipziger Straße 32 

 D-09648 

Mittweida 

 Germany 
 
Shipments not prepaid will be rejected and returned on the original sender's costs. 
 
 

Summary of Contents for QuadMic










Reviews: