background image

 

 

User's Guide QuadMic

 © RME

7

 

8. Warranty 

 
Each individual QuadMic undergoes comprehensive quality control and a complete test at IMM 
before shipping. The usage of high grade components should guarantee a long and trouble-free 
operation of the unit. 
 
If you suspect that your product is faulty, please contact your local retailer. 
 
Audio AG grants a limited manufacturer warranty of 6 months from the day of invoice showing 
the date of sale. The length of the warranty period is different per country. Please contact your 
local distributor for extended warranty information and service. Note that each country may 
have regional specific warranty implications.  
 
In any case warranty does not cover damage caused by improper installation or maltreatment - 
replacement or repair in such cases can only be carried out at the owner's expense.  
 
No warranty service is provided when the product is not returned to the local distributor in the 
region where the product had been originally shipped. 
 
Audio AG does not accept claims for damages of any kind, especially consequential damage. 
Liability is limited to the value of the QuadMic. The general terms of business drawn up by Au-
dio AG apply at all times. 
 
 

9. Appendix

 

 
 
RME news, driver updates and further product information are available on our website: 
 
http://www.rme-audio.com 
 
Distributor: Audio AG, Am Pfanderling 60, D-85778 Haimhausen, Tel.: (49) 08133 / 91810 
 
Manufacturer: 
IMM Elektronik GmbH, Leipziger Strasse 32, D-09648 Mittweida 
 
 

Trademarks

 

 
All trademarks, registered or otherwise, are the property of their respective owners. RME is a 
registered trademark of RME Intelligent Audio Solutions. QuadMic is a trademark of RME Intel-
ligent Audio Solutions. 
 

Copyright 

©

 Matthias Carstens, 03/2011. Version 1.1 

 

Although the contents of this User’s Guide have been thoroughly checked for errors, RME can not guarantee that it is 
correct throughout. RME does not accept responsibility for any misleading or incorrect information within this guide. 
Lending or copying any part of the guide or the RME Driver CD, or any commercial exploitation of these media without 
express written permission from RME Intelligent Audio Solutions is prohibited. RME reserves the right to change specifi-
cations at any time without notice. 

Summary of Contents for QuadMic










Reviews: