MIDI Breakout Cable Wiring Diagram
The M-32 AD Pro does not serve as a MIDI to/from MIDI over MADI converter. It does
not pass on incoming MIDI signals except for SysEx remote control information.
3.16. Word Clock
Word clock can be sent and received via 75
Ω
coaxial cabling at the corresponding BNC connectors.
The cable length should not exceed 100 m (330 ft).
The input is terminated with 75
Ω
internally. To pass on the word clock to other devices,
use the word clock
output
. Do not connect a T-adapter to the word clock input.
The state of an incoming word clock signal can be accessed in the
CLOCK
section.
Possible States:
• A
green indicator
shows that the signal is currently in sync with the chosen clock master.
• An
orange indicator
means that a word clock is received but is not in sync.
• A
red indicator
means that word clock is chosen as master, but a signal is not present or has a
different sample rate than the chosen one.
3.17. USB 2.0 Type B Jack
The USB jack at the rear of the M-32 AD Pro provides an alternative connection method for web remote
control when a network connection is not available.
RME M-32 AD Pro User’s Guide
3.16. Word Clock |
13
