3.6. Headphone Output
The M-1610 Pro features a stereo headphone output, 1/4" (6.3mm) TRS on the front panel. It can also
function as a dual mono unbalanced output (13 dBu) and as a mono balanced line level output (19 dBu).
Any digital or analog input signal can be monitored.
Always use balanced TRS connectors at this output.
3.6.1. Analog Output Specifications
Phones 1/2:
• Resolution: 24 Bit
• Noise (DR): 115 dB RMS unweighted, 118 dBA
• Frequency response @ 44.1 kHz, -0.5 dB: 9 Hz – 22 kHz
• Frequency response @ 96 kHz, -0.5 dB: 9 Hz – 45 kHz
• Frequency response @ 192 kHz, -1 dB: 8 Hz - 75 kHz
• THD+N: < -100 dB, < 0.001 %
• Channel separation: > 110 dB
• Output: 6.3 mm TRS stereo (unbalanced) or mono (balanced) jack
• Maximum output level at 0 dBFS: +13 dBu (unbalanced), +19 dBu (balanced)
• Output impedance: 100
Ω
3.7. Control Section
The M-1610 Pro can be configured completely at the device.
To do so, the a TFT display shows a menu. The adjacent encoder knob is used to navigate and change
settings.
The encoder can be
pushed
in order to activate an item,
RME M-1610 Pro User’s Guide
3.6. Headphone Output |
8
