RME Audio HDSPe RayDAT, User Manual

Page: 56 / 84

56
User's Guide HDSPe RayDAT
© RME
20.7.3 OSC Page
The OSC page has four independent settings for up to four MIDI remote controls via Open
Sound Control (OSC). This is a network based remote protocol that can be used for example by
Apple’s iPad with the app
TouchOSC or Lemur to wirelessly remote control TotalMix FX running
on a Mac or Windows computer.
Index
Select one of four settings pages and thus remote controls. Settings are remembered automati-
cally.
To activate or deactivate any of the four remote controls check or uncheck ‘In Use’.
TotalMix FX OSC Service

IP. Shows the network address of the
computer running TotalMix FX (local
host). This address must be entered on
the remote side.

Host Name. Local computer name.

Port incoming. Must match the remote
entry ‘Port outgoing’. Typical values are
7001 or 8000.

Port outgoing. Must match the remote
entry ‘Port incoming’. Typical values are
9001 or 9000.
Remote Control

IP or Host name. Enter the IP or host
name of the remote control. Please
note that the IP number usually works
better than the host name.
Options

Send Peak Level. Activates the trans-
mission of the peak level meter data.
Peak Hold activates the peak hold func-
tion as set up for the TotalMix level me-
ters in the preferences.

Lock Remote to submix. When acti-
vated the current remote control can
only modify the submix selected from
the drop-down list. This prevents havoc
in multi-remote monitoring environ-
ments.

Number of faders per bank. Available choices are 8 (default), 12, 16, 24, 32 and 48. Note
that when working in underperforming networks, especially wireless, a higher number of
faders might not work as smooth as expected.