User’s Guide HDSP System RPM
© RME
34
The card and drivers have been installed correctly, but playback does not work:
•
Check whether the Hammerfall DSP appears in the Device Manager. If the ' Hammerfall
DSP’ device has a yellow exclamation mark, then there is an address or interrupt conflict.
•
Even if there is no yellow exclamation mark, it is worth checking the ‘Resources’ tab
anyway.
•
Check whether the Hammerfall DSP has been selected as current ASIO device.
20. HDSP Software
20.1 DIGICheck 4.1
The DIGICheck software is a unique utility developed for testing, measuring and analysing
digital audio streams. Although the DIGICheck software is fairly self-explanatory, it still includes
a comprehensive online help. DIGICheck 4.1 operates as multi-client ASIO host, and can
therefore be used in parallel to any software, be it MME, ASIO or GSIF, both inputs and even
outputs (!).
The following is a short summary of the available functions:
•
Level Meter
. High precision 24-bit resolution, 2/8/26 channels. Application examples: Peak
level measurement, RMS level measurement, over-detection, phase correlation
measurement, dynamic range and signal-to-noise ratios, RMS to peak difference
(loudness), long term peak measurement, input check. Oversampling mode for levels higher
than 0 dBFS. K-system meter, free scaling/referencing.
•
Vector Audio Scope
. World wide unique Goniometer showing the typical afterglow of a
oscilloscope-tube. Includes Correlation meter and level meter.
•
Spectral Analyser.
World wide unique 10-, 20- or 30-band display in analog bandpass-filter
technology. 192 kHz-capable!
•
Bit Statistics & Noise
. Shows the true resolution of audio signals as well as errors and DC
offset. Includes Signal to Noise measurement in dB and dBA, plus DC measurement.
•
Totalyser
. Spectral Analyser and Vector Audio Scope as one window function.
•
Channel Status Display
. Detailled analyzis and display of SPDIF and AES/EBU Channel
Status data.
•
Completely Multi-client.
Open as many measurement windows as you like, on any
channels and inputs or outputs!
To install DIGICheck, go to the
\DIGICheck
directory on the RME Driver CD and run
setup.exe
.
Follow the instructions prompted on the screen.
20.2 HDSP Meter Bridge
The Hammerfall DSP Meter Bridge is a unique, highly flexible and handy tool for level
metering. As opposed to DIGICheck, the HDSP Meter Bridge receives all level data directly
from the hardware. Thus the Meter Bridge can run in parallel to any other program. As Peak
and RMS calculations are performed directly in hardware, the CPU load caused is limited to the
graphics routines – and is near zero on todays computers.
Although the HDSP Meter Bridge is fairly self-explanatory, it still includes a comprehensive
online help. To start press F2 and F3, the most important hotkeys.
To install the HDSP Meter Bridge, go to the
\HDSP Meter Bridge
directory on the RME Driver
CD and run
setup.exe
. Follow the instructions prompted on the screen.
