background image

 
 

 

User's Guide 

DIGI96/8 PST  © RME

 

27

 

 

19. Warranty

 

 
Each individual 

DIGI96/8 PST 

undergoes comprehensive quality control and a complete 

test in a PC environment at RME before shipping. This may cause very slight signs of wear on 
the contacts (if the card looks like it was used one time before - it was). The usage of high gra-
de components allows us to offer a full two year warranty. We accept a copy of the sales re-
ceipt as valid warranty legitimation. 
 
RME’s replacement service within this period is handled by the retailer. If you suspect that your 
card is faulty, please contact your local retailer. The warranty does not cover damage caused 
by improper installation or maltreatment - replacement or repair in such cases can only be car-
ried out at the owner’s expense. 
 
RME does not accept claims for damages of any kind, especially consequential damage. Liabi-
lity is limited to the value of the 

DIGI96/8 PST

. The general terms of business drawn up 

by Synthax OHG apply at all times. 
 
 

20. Appendix

 

 
RME news, driver updates and further product information are available on our website: 
http://www.rme-audio.com 
 
If you prefer to read the information off-line, you can load a complete copy of the RME website 
from the RME Driver CD (in the 

\rmeaudio.web

 directory) into your browser. 

 
Distributor in Germany: 
Synthax Audio AG, Am Pfanderling 62, D-85778 Haimhausen, Tel.: (49) 08133 / 91810 
 
Manufacturer: 
IMM Elektronik, Leipziger Str. 27, D-09648 Mittweida 
 
 
 

Trademarks

 

 
All trademarks and registered trademarks belong to their respective owners. RME, DIGI96, 
SyncAlign, DIGICheck and ZLM are registered trademarks of RME Intelligent Audio Solutions. 
SyncCheck is a trademark of RME Intelligent Audio Solutions. Alesis and ADAT are registered 
trademarks of Alesis Corp. ADAT optical is a trademark of Alesis Corp. Microsoft, Windows, 
Windows 98/NT/2000/XP are trademarks of Microsoft Corp. Apple and MacOS are registered 
trademarks of Apple Computer Inc. Cubase and VST are registered trademarks of Steinberg 
Soft- und Hardware GmbH. ASIO is a trademark of Steinberg Soft- und Hardware GmbH. e-
magic and Logic Audio are registered trademarks of emagic Soft- und Hardware GmbH. Penti-
um is a registered trademark of Intel Corp. 
 
 

Copyright 

 Matthias Carstens, 5/2002. Version 1.9 

Current driver version: W98: 4.96, NT 3.86, W2k/XP: 2.0 
 
This manual applies to board revision 1.0, hardware version 005. 
 
Although the contents of this User’s Guide have been thoroughly checked for errors, RME can not guarantee that it is correct 
throughout. RME does not accept responsibility for any misleading or incorrect information within this guide. Lending or 
copying any part of the guide or the RME drivers CD, or any commercial exploitation of these media without express written 
permission from RME Intelligent Audio Solutions is prohibited. RME reserves the right to change specifications at any time 
without notice. 

Summary of Contents for DIGI 96/8 PST































Reviews: