32
User's Guide ADI-6432R BNC © RME
14.6 Firmware
The ADI-6432's main part has been realized using programmable logic. By re-programming of a
little component called Flash-PROM, both function and behaviour of the unit can be changed at
any time.
At the time of writing this manual, the unit is shipped with firmware 1.5. The firmware version is
displayed after power on for about one second by the SYNC and AUDIO LEDs of the AES
INPUT STATE section.
14.7 Connector Pinout RS232
The 9-pin D-Sub Connector is wired according to industry standard:
Signal In (Rx)
Out (Tx)
GND
NC
D-sub 2
3
5 9
Internally connected are pins 1 with 6 and 4, and pin 7 with 8.
14.8 MADI User Bit Chart
•
RS-232: channels 1 to 9
•
ADC: channel 19
•
MIDI: channel 56 (48k) / 28 (96k)
Summary of Contents for ADI-6432(r)
