RME Audio ADI-6432(r), User Manual

Page: 30 / 40

30
User's Guide ADI-6432R BNC © RME
14. Technical Specifications
14.1 Inputs
MADI
•
Coaxial via BNC, 75 Ohm, according to AES10-1991
•
High-sensitivity input stage (< 0.2 Vpp)
•
Optical via FDDI duplex SC connector
•
62.5/125 and 50/125 compatible
•
Accepts 56 channel and 64 channel mode, and 96k frame
•
Single Wire: up to 64 channels 24 bit 48 kHz
•
Double Wire: up to 32 channels 24 bit 96 kHz
•
Lock range: 28 kHz – 54 kHz
•
Jitter when synced to input signal: < 1 ns
•
Jitter suppression: > 30 dB (2.4 kHz)
AES-3id
•
32 x, transformer-coupled, grounded, according to AES3-4-2009
•
High sensitivity input stage (< 0.3 Vpp)
•
SPDIF compatible (IEC 60958)
•
Accepts Consumer and Professional format, copy protection will be ignored
•
Single Wire: 32 x 2 channels 24 bit, up to 192 kHz
•
Lock range: 28 kHz - 104 kHz, 162 kHz - 204 kHz
•
Jitter when synced to input signal: < 1 ns
•
Jitter suppression: > 30 dB (2.4 kHz)
Word Clock
•
BNC, not terminated (10 kOhm)
•
Switch for internal termination 75 Ohm
•
Automatic Double/Quad Speed detection and internal conversion to Single Speed
•
SteadyClock guarantees super low jitter synchronization even in varispeed operation
•
Not affected by DC-offsets within the network
•
Signal Adaptation Circuit: signal refresh by auto-center and hysteresis
•
Overvoltage protection
•
Level range: 1.0 Vpp – 5.6 Vpp
•
Lock range: 28 kHz – 220 kHz
•
Jitter when synced to input signal: < 1 ns
•
Jitter suppression: > 30 dB (2.4 kHz)
14.2 Outputs
MADI
•
Coaxial via BNC, 75 Ohm, according to AES10-1991
•
Output voltage 600 mVpp
•
Cable length coaxial: up to 100 m
•
Optical via FDDI duplex SC connector
•
62.5/125 and 50/125 compatible
•
Cable length optical: more than 500 m
•
Generates 56 channel and 64 channel mode, and 96k frame
•
Single Wire: up to 64 channels 24 bit 48 kHz
•
Double Wire / 96k frame: up to 32 channels 24 bit 96 kHz