i -27
Graphic Subsystem
This notebook comes with an integrated VIA S3 ProSavage DDR video
graphics accelerator based on the share memory architecture (i.e. a
portion of the system memory is allocated for graphic engine’s use.)
Depending on the total system memory installed, up to 32MB can be
allocated as graphic frame buffer. More memory to the graphic
subsystem means higher graphic performance; however, as it
decreases system memory capacity, overall system performance may
suffer. See Section 2 on how to increase or decrease the graphic
memory.
Adjusting the Display Brightness
The notebook uses special key combinations, called hot keys,
to control brightness.
Press Fn+F7 to increase the brightness.
Press Fn+F8 to decrease the brightness.
Note:
To maximize your battery operating time, set the brightness to the
lowest comfortable setting, so that the internal backlight uses less power.
Extending the Life of the TFT Display Device
Observe the following guidelines to maximize the life of the
backlight in the display.
1. Set the brightness to the lowest comfortable setting
(Fn+F8).
