© RLS Wacon GmbH ∙ +49 (0)5121 28126 0 ∙ info@rls
-wacon.de
35
Display with value entry
The numbers are entered via a display keypad. You can move the cursor with the arrow keys [
],
[
], [
] and [
] of the device. The input mask additionally displays the currently set numerical
value and the valid input range.
You will see an input keypad. Now use the arrow keys to move the black cursor to the desired digit
and press the [OK] key.
The selected digit appears on the left side in a frame. Repeat the entry until the desired number is
in the frame. Now move the cursor to the OK field in the keyboard and press the [OK] key.
You will see the following information:
Current:
currently set value
Minimum:
smallest settable value
Maximum:
largest settable value
Should the value at "Current" corresponds to your request, then you do not
need to re-enter the number and you can immediately move the cursor to
the OK field in the keyboard and confirm with the [OK] key.
In the lower example of flushing time, a flushing time between 15 and 1800 seconds can be set.
The currently programmed flushing time is 120 seconds.
After entering a flushing time of 90 seconds, confirming with the [OK] key overwrites the current
flushing time with 90 seconds.
Operation
