General Specifications
Transmission method
Frequency modulated light via two optical fibers
Multimode
1310nm
Single-mode
1310nm/1550nm
Maximum Fiber
Attenuation / Distance*
Single Fiber
Single-mode (8~9/125µm):
Up to 37 mi./60km range
Dual Fiber
Multimode (50/62.5/125µm): 1.25mi./2 km range
Single-mode (9/125µm):
Up to 74 mi./120km range
*Note
: Distances equated using industry standard fiber and connector attenuation.
Fiber condition, splices and connectors may affect actual range.
Connector Type
ST or SC Multimode or Single-mode
Power Margin
11dB(2Km, M/M), 12dB ~ 35dB (20 ~ 120Km, S/M)
Protocols
RS-232
DB-9 Port (Female)
RS-232
DCD, RXD, TXD, DTR, GND, DSR, RTS, CTS, RI
Signal Isolation
Optical Isolation 3000 Vrms
Baud Rates
50bps-1Mbit/s Automatic Detection
DIP Switches
DCE / DTE
Specifies the DB-9 Ports Operational Mode (DCE or DTE)
LED
POWER
DC Power OK
See
Front Panel LED Indicators
section in
User Guide for more detailed information.
FIBER
Fiber Connection OK
TX
RS-232 Copper Transmit
RX
RS-232 Copper Receive
Power Input
24~48VDC or 125VDC nominal
Dual redundant power inputs
Power Consumption
150mA @ 24VDC or 3.6 Watt
DC Input Isolation (In/Out)
1.5KV
Voltage Reversal Protection
Will operate with V+ or V- in either power terminal
Over Current Protection
1.0A (Automatic Recovery)
Temperature
Storage
-40˚C to +85˚C (-40˚F to +185˚F)
Operating
-40˚C to +70˚C (-40˚F to +158˚F)
Dimensions/Mounting
H 4.93” x W 1.20” x D 3.93” (not including DIN clip)
Standard T-35 DIN rail mounting or wall mount with included brackets
Warranty
Limited Lifetime
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
Page
"
12
