RLH Industries, Inc.
936 N. Main Street, Orange, CA 92867
Phone: 800-877-1672
FAX: 714-532-1885
email: [email protected]
www.fiberopticlink.com
Fiber Optic Link
RLH Industries, Inc.
The leader in
rugged, fiber op�c
technology
USER GUIDE
Note:
Connec�ng an auto-nego�a�ng device to a non-auto-nego�a�ng device may result in an unpredictable
port se�ng with poor link performance. When opera�ng in Manual mode, both ma�ng ports must be set to the
same data rate and duplex mode.
■
A�er changing any of the DIP switches, recycle the power to the card by flipping switch 6 (Reset) from RST to
ON then back to RST
■
DIP switch 2 must be set to MAN (ON) when switches 3 and 4 are set to 10 and HDX respec�vely
Switch
Descrip�on
Se�ng
Func�on
1
Link Fault Pass-Through
LP
LS
LFP Enabled
LFP Disabled (default)
2
TP Port Mode
AN
MAN
TP is auto nego�a�ng (default)
Force TP at 10M or half duplex
3
TP Port Speed
100
10
TP at 100M (default)
TP at 10M when TP Port Mode is set to MAN (Force 10M)
4
TP Port Duplex
FDX
HDX
TP at full duplex (default)
TP at half duplex when Port Mode at Force
5
Fiber Port Duplex
FDX
HDX
Fiber port at full duplex (default)
Fiber port at half duplex
6
Reset
On
RST
Power on
Recycle power (default) (See note below)
Installation (cont’d)
The front panel DIP switches may be set for op�onal modes. The factory default is
OFF
for all switches.
DIP Switch Settings
