General Specifications
Transmission method
Amplitude modulated light via two optical fibers
Multimode:
850nm (Tx level: -16dB ± 1dB)
Single-mode:
1310nm (Tx level: -23dB ± 1dB)
Single-mode Long Haul:
1310nm (Tx level: -8dB ± 2dB)
Maximum Fiber Attenuation /
Distance
Multimode:
10dB / 1.2 miles (2 km)
Single-mode:
8dB / 9 miles (15 km)
Single-mode Long Haul:
26dB* / 37 mi. (60 km), *min. required loss -8dB
*Note: Distances equated using industry standard fiber and connector attenuation of
3dB/Km. Fiber condition, splices and connectors may affect actual range.
Fiber Type
ST or SC connectors
Multimode:
62.5/125µm, 50/125µm
Single-mode:
8-9/125µm
Temperature Limits
-40°F to +158°F (-40°C to +70°C)
Humidity
95% non-condensing
Dimensions
RLH Standard Fiber Link Card Form Factor L7” x W4”x H1.2”
Mounting
Installed into any RLH Fiber Link Card Housing. Rack, DIN mount and wall mount
housings are available.
BER
<10
-9
Surge Protection
Fuses, thyristors, PTC thermistors, zeners, and MOVs
Local Power Requirement
24-56 VDC, 60mA maximum
Powering Method
60mA line power simplexed on Send and Receive pairs, or an isolated DC power
source connected to power input terminals.
Power Connector
Non-polarity sensitive local power input via removable screw down terminal block
Compatibility
Compatible with RLH 1 & 2 Channel Fiber Link Card and DIN systems.
Warranty
Limited Lifetime
Visit
for warranty details
RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com
Page
"
13
