4
DOCNUMBER 8410
Document Issue 1.1
August 2015
Page 4–1
4
Setting Up the Amplifier
4.1 Unpack the Amplifier and Transformer 4–1
4.2 Connect the Transformer 4–2
4.3 Check the Tubes and Exhaust Chimney 4–3
4.4 Connect the Voltage Tap 4–3
4.5 Connect the Cables 4–4
4.6 Set the Input-Drive Power 4–6
4.7 Connect the Transceiver Keying Line 4–7
!
IMPORTANT
The Alpha 8410 is easy to set up, tune, operate, and maintain.
However, failure to carry out each procedure exactly as described in
this manual is likely to lead to amplifier damage, which is not covered
under warranty. Damage to other station equipment may also result.
Proceed slowly throughout these procedures to avoid bumping and
damaging adjacent wires, connectors, and components.
4.1 Unpack the Amplifier and Transformer
Procedure 4-1
Unpack the amplifier and transformer
Step 1
Prepare your station as described in
Chapter 3, “Preparing Your Station.”
Step 2
Remove the amplifier and transformer from their cartons.
The Alpha 8410 ships in two heavy-duty double-wall cardboard boxes.
The carton containing the amplifier weighs 50 lb (23 kg); the carton
containing the transformer weighs 43 lb (20 kg).
2a
Inspect the boxes for shipping damage.
2b
Unpack the boxes and place the contents on a workbench or table.
2c
Retain the boxes and all packing material in case you need to ship the
unit later.
Step 3
Inspect the amplifier and transformer for shipping damage.
If you find damage, call RKR Designs technical support.
