STEP 5-1 Tail Section Belt
Bag Contend:
1x Tailcase
1x 10T XL Pulley
1x 14mm Pin
1x Tail Shaft
1x M3x4 Set Screw
1x Tail Control Arm Support
1x Tail Control Arm
2x M2,5x6 Socket Head Bolt
1x M2x5 Socket Head Bolt
1x M3x25 Socket Head Bolt
2x 3x5x2 Washer
1x 3x5x1 Washer
1x Joint Ball
10T XL Pulley
14mm Pin
Tail Shaft
Tail Case
M3x4
3x5x2
Washer
Tail Control Arm
3x5x2 Washer
M3x25
Tail Control Arm Support
M2x5
Joint Ball
A11
3x5x1
Washer
To remove the tail shaft, heat the
14mm pin with the tip of a
soldering iron and press out with
a small screwdriver or use a draft
pin and arbor press.
CHECK THE PRE-ASSEMBLED
SYSTEM FOR THREADLOCK
