A2
STEP 1-3 Drive Gear Assembly
STEP 1-4 Fuel Tank and AUX Tank Assembly
M3x6 Socket Head Bolt
85T Main Gear
M3x6 Counter Socket Head Bolt
80T Tail Drive Gear
Tail Drive Gear Housing
Autorotation Shaft
Autorotation Spacer
IMPORTANT:
Stepped side facing downward
and entering completly inside
the bearing.
View of complete Assembly
Match the holes to line up.
CAUTION:
Clean off any dust on drive gears.
Add grease to the one way bearing,
to ensure smooth opperation.
Don´t fix the four M3x6 bolts before
having all four in place.
IMPORTANT:
Check the correct side for
installing the Drive Gears.
See in the picture above.
USE THREADLOCK
Main Tank
Fuel Clunk
Silicon Tube 77mm
Tank Grommet
Tank Nipple
Tank Nipple
Tank Grommet
Silicon Tube 40mm
Fuel Clunk
AUX Tank
To Main Tank
To exhaust pressure nipple
IMPORTANT:
Make sure that the Fuel Clunk can move freely inside the tank.
Be sure to replace the silicon fuel tubing
inside the Main and AUX Tank regularly.
NOTE:
Cut the fuel tubing to length (30mm) using a hobby knife
So there is a clean cut.
