Fixing point
NOTE:
Use the M3x10 Socket Head Bolts and Finish Caps to
secure the canopy to the body of the helicopter
STEP 8-4 CANOPY ATTACHMENT
Rear Canopy Mount
Front Canopy Mount
STEP 8-5 MAIN / TAIL BLADE INSTALLATION
M4x30 Socket Head Bolt
M4 Lock Nut
M3 Lock Nut
M3x14 Socket Head Bolt
IMPORTANT:
Check the correct way you install the tail blades.
They should turn counter clock wise looking onto
like shown in the diagram above.
IMPORTANT:
Ensure the Main blades are balanced and
correctly fit. The main rotor turn clock wise.
The Blade gribs are 14mm. If necessary add
one 1mm shim up and under the blade if they
are from 12mm.
A28
NOTE:
Use a 6mm drill to make the holes for the Canopy rubbers. Attache the
canopy BEFORE making the holes to dobble check the attachment
holes. Put the rubbers for about 3 min. in hot water to insert them
more easier in the canopy.
