For further iLAP receiver configuration and setup advice refer to the iLAP documentation.
Hardware Specifications
•
36x36mm board with 30.5mm mounting holes
•
Weight ~5 grams
•
STM32F303 CPU, 72Mhz inc FPU
•
MicroSD card slot (SD/SDHC, upto 32GB)
•
MPU9250 accelerometer/gyro/compass (connected via SPI)
•
BMP280 barometer
•
1 IR LED and unique code for race transponder
•
MicroUSB socket for configuration and ESC programming
•
3 LEDs for 5V, 3V and STATUS (Green, Blue, Red)
•
Supplied with straight and right-angled pin headers.
•
Copper-etched Cleanflight logo
•
8x 3pin though-holes for pin headers for ESC/Servo connections
•
1x 2pin though-holes for pin headers for UART1 RX/TX
•
1x 6pin though-holes for pin headers for UART2/PPM/Telemetry/LiPo (for standard SerialRX/SBus/PPM lead)
•
1x 4pin though-holes for pin headers for UART3
•
1x 6pin though-holes for pin headers for IR LED/LED Strip, RSSI, Current Monitoring, and Buzzer connections
•
1x 3pin though-holes for JST-ZH connector for Spektrum Satellite receivers (connector supplied).
•
1x 4pin top mounted, JST-SH socket for I2C
•
1x 4pin top mounted, JST-SH socket for UART2/PPM
•
1x 4pin bottom mounted JST-SH socket for SWD debugging
•
1x 2pin though-holes for BOOT jumper.
Credits and acknowledgements
Hardware design by Dominic Clifton.
Manual by Dominic Clifton.
Seriously Pro website by Dominic Clifton.
Cleanflight firmware and GUI tools are maintained by Dominic Clifton.
Blackbox flight logging component, tools and SD Card support by Nicholas Sherlock.
The flight controller software is based on MultiWii by Alex Dubus.
The GUI tool was based on software by cTn.
Big thanks to the SPRacingF3EVO test pilots.
Thanks to Painless360 / Lee Schofield for ideas and tutorial videos.
https://www.youtube.com/user/Painless360/playlists
Thanks to everyone who provided feedback on the SPRacingF3 Acro/Deluxe/Mini boards.
Software support and contributions from many, many authors. For a complete list see github contributors.
https://github.com/cleanflight/cleanflight/graphs/contributors
Community
Thanks to everyone from the AWESOME Cleanflight community for code, artwork, support, ideas, feedback, and
everything else. Without you all this product would not exist.
SPRacingF3EVO
Page 11
