ADVANCED FEATURE: SPLIT MONO MODE
The Mini E
ff
ect Gizmo X has the ability to split its stereo loops so that instead of left and right sides, the
loops are divided into two separate mono loops. This can give you up to 12 mono loops. This is
considered an advanced configuration, because it requires extra care in cabling and setup.
The Mini E
ff
ect Gizmo X editor is required to set up this feature. In the Global Settings menu, each loop
has a Split Mono checkbox. Check this and it will create another loop. Turning on Split Mono for loop 1
will create loop 7, turning on Split Mono for loop 2 will create loop 8, etc. These loops will appear
alongside the normal 6 loops in the loop order, preset settings page, etc. and can be configured like any
other loop, except that they have to be mono.
Once a loop is configured for split mono, you need to make sure that you’re using the correct cabling.
You’ll need two insert cables, same as with a stereo pedal. But, the connections are a bit di
ff
erent. This is
how you would connect two pedals to the SND1 / RTN1 jack, where one pedal is in loop 1 and the other in
loop 7
Each pair of pedals can be wired like this, using another pair of insert cables.
25
To Loop Return
To Loop Send
< Tip Plug to Input
Tip Plug to Output >
< Ring Plug to Input
Ring Plug to Output >
Primary Loop (Loop 1)
Secondary Loop (Loop 7)