FUZZ MODE
Fuzz Mode lets you specify that certain loops contain pedals that don’t work well with bu
ff
ers, so that the
Mini E
ff
ect Gizmo X can disable the bu
ff
er when the pedal is active and the bu
ff
er would interfere with its
operation. For more details, please refer to the
section.
Hold the Switch 5 button while powering the Mini E
ff
ect Gizmo X on. The LEDs on the Mini E
ff
ect Gizmo
will cycle a few times, then will turn o
ff
. The Bu
ff
er LED starts flashing at this point. Once that happens,
you can release the button. Now, press the Switch button or buttons to enable fuzz mode on loops. If a
loop’s LED is on, fuzz mode is on for that loop. If the LED is o
ff
, fuzz mode is o
ff
.
Once you’ve set the fuzz mode options, press the
Bu
ff
er
button. The Mini E
ff
ect Gizmo is now in normal
operational mode.
MONO/STEREO MODE
You can configure the input, output or loops to be mono or stereo from this mode.
Hold the Switch 6 button while powering the Mini E
ff
ect Gizmo X on. The LEDs on the Mini E
ff
ect Gizmo
will cycle a few times, then will turn o
ff
. The Bu
ff
er LED starts flashing at this point. Once that happens,
you can release the button.
Now, each loop and switch LED indicates a mono or stereo setting:
Loop 1-6 LEDs indicate whether loops 1-6 are mono or stereo
Function Switch 1 LED indicates whether the input is mono or stereo
Function Switch 2 LED indicates whether the output is mono or stereo
In all cases, LED o
ff
means the loop, input or output is mono, and LED on means that it’s stereo.
Once you’ve set the mono/stereo mode options, press the
Bu
ff
er
button. The Mini E
ff
ect Gizmo is now in
normal operational mode.
FACTORY RESET
To return the Mini E
ff
ect Gizmo X to its factory state, hold the 1 and 4 buttons while you power it up. After
a few seconds all of the LEDs should turn on. You can release the buttons at this point. After a few
seconds, the LEDs will turn o
ff
, leaving the Mini E
ff
ect Gizmo in the factory reset state.
19