RJM Mastermind GT/10, User Manual, Page: 28 / 73

20
buttons will not rearrange the order of presets – the buttons will still have presets assigned to them based on their
physical location on the Mastermind GT.
As of firmware version 2.2, you can change how the Mastermind GT assigns presets to preset buttons. There’s a
parameter called Preset Index that allows you to change the order in which presets are assigned to buttons. All buttons
are assigned preset index 0 by default. To change the order of preset assignment, set the preset index to 1 for the
button that should display the first preset in the current bank, set the preset index to 2 on the button that should
display the second preset, in the current bank, etc. You can rearrange the preset buttons in any way you like using this
method.
Assign Buttons
Most devices in the Mastermind GT’s device database have information about the various parameters that can be
controlled on the device. The Assign Buttons function allows you to quickly assign a button to control one of these
parameters.
To access the Assign Buttons function, select
Edit Devices from the main menu, then select the device you wish to
control. Select the Assign Buttons option
You will be shown a list of parameters that are available on the device.
Type
Rack Gizmo
Name
Rack Gizmo
Edit Device 1
Rack Gizmo
Done
Done
Next
Page
MIDI Ch
1
Assign
Buttons
Set Default
Buttons
Set Default
Pedals
Port
MIDI Out
Preset Offst
0
Comp
On/Off
Drive
On/Off
Assign Buttons
Select a function
Done
Done
Next
Page
Flange
On/Off
Digi Delay
On/Off
Tape Delay
On/Off
Harmony
On/Off
Reverb
On/Off
Tap
Tempo
EQ
On/Off
Spkr Sim
On/Off
Resonator
On/Off
Whammy
On/Off
Wah
On/Off
FX Loop
On/Off
Select