RJL systems QUANTUM III, User Manual, Page: 10 / 29

- 10 -
Navigation through the program that runs on the Q3 is done by use of a couple of menus. To
get to the main menu, press the
MENU key. When you do, the top four lines of the menu
will appear on the screen. For reference, the entire menu is shown below on the right. Use
the up and down arrows to move the blinking cursor through the list of screens. When the
cursor is next to the screen you want, press the
ENTER key.
Here is a brief introduction to the various screens listed in the
main menu:
•
Main Page
You were introduced to the main page in the previous section.
This screen shows you either the BIA readings currently being
measured (if cables are currently connected to the patient) or
the message saying the cables are disconnected.
•
Time & Date
This screen is shown briefly when you turn on the Q3. It dis-
plays the current time and date which will be printed on re-
ports or saved on BIA records. This screen provides the op-
portunity to update the Q3’s system clock.
•
Subject Input
This screen is used to enter patient data to calculate body com-
position. Once all of the necessary data has been inputted,
you will have the opportunity to view body composition re-
sults and print reports.
•
Edit Preferences
The preferences screen allows you to configure the behavior
of the Q3. You can set units for height and weight, time and
date formatting, etc.
•
Storage Status
Going to this screen will show you how many records are
currently stored on the Q3 and much space remains in the
memory. For more information, refer to “
Storage Status ”
•
Run Self Tests
Selecting this menu option will re-run all of the tests that are
performed every time the Q3 is turned on.
•
About
This menu option takes you to the title page that you were
introduced to in “
What Happens When the Q3 is Turned
On .”
The Main System Menu
INTRODUCING THE MAIN MENU