Rotate the transponder assembly and repeat the same steps for the opposite
side.
Figure 4-3 ATT-400/AODC Battery Installation
•
Before installing the end cap assembly, make sure the O-ring and O-ring surfaces
are clean and free of debris. Lubricate the O-ring with a light coat of silicon grease
(O-lube) supplied in the spares kit.
•
Reassemble the unit.
8
RJE International, Inc.
Tel: (949) 727-9399 | Fax: (949) 727-0070 | [email protected] | www.rjeint.com
