4
HOW TO USE YOUR POWERCHAIR
These instructions are duplicated from the user manual to allow technicians to use the
Independent safely.
4.1
Preparing for use
4.1.1
Unpacking
Remove all parts from the packaging and check against the parts list
in Section 3.
4.1.2
Controller
Fit the controller to the sliding bracket using the screws provided.
4.1.3
Battery Box
Remove the two screws securing the lid. Put batteries in the boxes and
connect batteries to cables inside the battery box lids using bolts
provided and 10mm AF spanners. BE SURE TO CONNECT POSITIVE
RED CABLE MARKED ‘+’ TO THE BATTERY TERMINAL DESIGNATED
‘+’. CONNECT NEGATIVE BLACK CABLES MARKED ‘-’ TO THE
BATTERY TERMINAL DESIGNATED ‘-’. DO NOT TIGHTEN THE
BOLTS TO MORE THAN 13Nm (10lbft). Replace lid and fit screws
before use.
4.1.2
4.1.3
-6-
