The Back End Bow
1. At the base of the back End Bow, fit (9) to (4). Attach (10a+b) to the center of the last
End Bow. Use Bolts (13), Washer (17), and Nuts (16). Repeat on the other side of the
End Bow. Do not completely tighten at this time because minor frame adjustments will
be done later.
2.
At the base of the first Bow in from the end, attach (9) to the base of (5). Swing the end
of (10a+b) over to the connection of (5) and the end of (8). The tapered end of (8) fits into
(9). Use Bolts (13), Washers (17), and Nuts (16). Do not completely tighten at this time
because minor frame adjustments will be done later. Repeat these steps on the
opposite end of the End Bow. Continue assembling (8) between all of Middle Bows until
the final Middle Bow, using the hardware (14), (16).
See Figure 4.
Figure 4
SKU 103-1642
Page 6
Summary of Contents for RV SHELTER 103-1642
Page 15: ......
