9
9
Installation guide
Assembling the headboard bracket (optional)
Using the remote control, raise the head section of the adjustable bed to its full
height.
Locate the first round panel under the head section of the bed. The second round
panel is for the bed leg.
Position the inner headboard bracket underneath the first round panel. The bracket
opening should be facedown under the bar.
Insert a retainer bolt fitted with a washer into the slot under the inner headboard
bracket and through the round panel. Tighten the bolt using the Allen key wrench.
Place the open side of the outer headboard bracket onto the exposed square tube
of the inner headboard bracket to create a tight fit.
Insert a retainer bolt fitted with a washer through the outer headboard bracket and
into the inner headboard bracket. Tighten the bolt with an Allen key wrench. Leave
loose enough for adjusting.
Repeat steps 2 to 6 to install the brackets on the other side of the head section of
the adjustable bed.
NOTE:
When the headboard brackets are assembled, make sure there is a space
of 1.5 inches (38.1 mm) to 2 inches (50.8 mm) between the edge of the adjustable
bed and the headboard brackets.
Securely fasten the headboard bolts (not included with your parts box) to the end
of the headboard bracket assembly.
If you need to adjust the headboard brackets, unscrew the bolts holding the outer
headboard bracket and move them the necessary distance. Reinstall the bolts and
tighten securely.
1
2
3
4
5
6
7
IMPORTANT!
•
Failure to follow the installation steps as they appear in this guide could result in damage to your adjustable bed.
•
For safety reasons, lifting of the adjustable bed must always be performed by two (2) people; and the unit should always be on a flat surface.
•
Make sure to position the bottom of the headboard cross member no more than 3 inches (76.2mm) between the headboard and the top of the mattress.
8
9
Place your mattress on the adjustable bed surface.
Your adjustable bed and headboard installation is now complete.
NOTE:
Headboard bracket parts are sold separately.