10
Owner’s manual |
Clarity II-E
adjustable bed
Remote control guide
Using two bases with one remote
Set up both bases and position them next to each other following the instructions
on page 6.
Make sure both beds are plugged in, then raise the heads of both beds to access the
control boxes under the beds.
To operate two bases together as one bed.
1
2
Carefully unplug both beds.
Find the pairing button on the control box on the underside of the first bed. Plug
the power cord into the wall outlet, and then press and hold the pairing button for
three seconds. A light will flash to indicate the bed is ready for pairing. Press any
button on the remote control (except the flashlight button). A beep will sound that
indicates the remote has been paired with the base.
Plug in the second bed and repeat the actions in step 4 on the second bed, using
the same remote.
Before using the adjustable base, make sure that the cords don't interfere with any
of the bed's operations.
Both bases should now operate as one bed.
3
4
5
6
7
Use the pairing button on the control box
