Rivulite aqua
Rivulite aqua
Home Garden Irrigation System
Balcony Garden
Design Your Garden Layout as per space and utility
Tips for maintenance and to ensure better performance of the
system
Rivulite aqua
-
Ensure the inlet water quality and avoid sand, mud and other hard particles entering the drip line.
Remove the end cap of the drip tube and allow free flow of water for 1 to 2 minutes once in a month to
clean up the system.
If the water is blocked in any of the dripper due to dust particles, open the dripper cap, clean it and use
again.
For the proper functioning of the irrigation controller, ensure a water pressure of minimum 14 PSI
(water flow from approximately 15 feet above water tank).
Observe the water requirement for pots/ plants and set the duration of water flow in the irrigation
controller accordingly.
If the irrigation controller is not working, check the battery and replace the battery if required.
To ensure the free flow of water through the irrigation controller, clean the filter at the inlet of
irrigation controller once in 6 months.
Do it yourself
