Typical Drip System Layouts
P.S.I. LOST
FT OF HEAD OR
ELEVATION
SURFACE WATER CHLORINATION
For best results; if using surface water, you should chlorinate your system every two
weeks. Inject approximately ½ Gal. chlorine bleach per acre. Run system about 20 minutes
then let set for ½ day before irrigating again.
H
aVING
t
rouBle
G
ettING
tHe
H
oSe
oVer
F
IttINGS
?
t
ry
t
HIS
...
1.
Make two slits approximately 1" apart and 1" long, on each side of the
hose end.
2.
Lubricate the inside of the hose and the outside of the fitting and set
it upright on ground.
3.
Use two vise grips to clamp on the "flaps" and wobble the hose back
and forth over the fitting as shown at right.
Valve
Valve
Valve
Valve
*Manifolds with Pressure Regulators &
Valves on Page 30
*Drip Line Fittings on
Page 12
Water Source
Fertilizer Injector
Layflat
Pump & Check Valve
Layflat
Pressure Regulator
Water Source
Pump & Check Valve
Filter
Fertilizer Injector
Water Source
Pump & Check Valve
Filter
Fertilizer Injector
Layflat
Drip Lines
Pressure Regulator
Valve
Pressure Regulator
Layflat
Pressure Regulator
Pressure Regulator
Drip Lines
Drip Layout
1
Drip Layout
2
Drip Layout
3
Filter
Oval Hose Or FlexNet
Oval Hose Or FlexNet
Oval Hose Or
FlexNet
Oval Hose Or
FlexNet
Oval Hose Or
FlexNet
Oval Hose Or
FlexNet
Oval Hose Or
FlexNet
84
Drip Information
