23
When a pump or blower is turned on by a button press, a clean-up cycle begins
30 minutes after the pump or blower is turned off or times out. The pump
and the ozone generator will run for 30 minutes or more, depending on the
system. On some systems, you can change this setting. (See the Preferences
section on page 33).
3.6.14 The cleaning cycle
3.6.15 Preferences
Preferences
The Preferences Menu allows the user to change certain parameters based
on personal preference.
Temp Display
Change the temperature between Fahrenheit and Celsius.
Time Display
Change the clock between 12 hr and 24 hr display.
Reminders
Turn the reminder messages (like “Clean Filter”) On or Off.
Cleanup
Cleanup Cycle Duration is not always enabled, so it may not appear. When it
is available, set the length of time Pump 1 will run after each use. 0-4 hours
are available.
Dolphin Address (Applies to RF Dolphin only)
When set to 0, no addressing is used. Use this setting for a Dolphin II or Dolphin
III which is factory set for no address by default. When set between 1 and 7,
the number is the address. (See the Dolphin manual for details.)
Colour
Selecting Colour will cycle through 5 background colors available in the control.
Language
Change the language displayed on the panel under preferences.
Commissioning and Operation
