Rasa Beta Operating Manual
5. Earth the Rasa Beta
- connect the crocodile clip at the end of the green cable on the
refueller dispenser to the earthing point next to the Rasa Beta refuelling receptacle. This is
done to stop static discharge. (Figure 18)
6. Visually
check there is no damage
to the HRS nozzle. If there is, do not proceed with the
refuelling and contact the Riversimple Service Team.
7. Visually
check for foreign object
s in the end of the nozzle. If there is, attempt to remove. If
unable to remove, contact the Riversimple Service Team.
8.
Connect the HRS nozzle to the Rasa Beta refuelling receptacle
. Make sure it is properly
locked. Pushing the Rasa Beta refueling receptacle so that the nozzle clicks into place (Figure
18). You may notice the pressure fluctuate on the display screen, do not worry, this is
normal.
9. Do not begin refuelling if you if you see the light on the HRS start to flash red. Press the
emergency stop button (Figure 19) and call Riversimple. If the light starts flashing at any
point during the refuelling process, press the emergency stop button and call Riversimple.
Figure 19: Refuelling dispenser display screen, emergency stop button,
start refuelling button, and stop refuelling button
13
