Check for parts online at
www.HuntRiversEdge.com
or call 800-450-EDGE (3343) M-F 8-5
11
Operator's Manual
BOWMAN Ladder Stand
33
33
14
14
FIGURE
9
FIGURE
10
FIGURE
10A
FIGURE
10B
15. Attach the two long ends of the 16’ criss-cross straps (33) to
the tree blade (14). These long stabilizer straps should be
attached by pulling the free end of the strap through the
loop end of the strap to create a cinch knot around the
tree blade (14). SEE FIGURES 10A AND 10B.
14. Slide the stabilizer bar (3) into the stabilizer support bar
(2) and secure using a lockpin (17). Make sure the lockpin
passes throughthe support bar (2) and the stabilizer bar
(3) at the appropriate hole to achieve the desired distance
from the tree. Adjustment in length may be needed when
ladder is uprighted later in the Setup and Use Instructions.
Connect the stabilizer bar assembly through the middle
ladder section with stabilizer slot (9). These components
will be connected using a lockpin (17). SEE FIGURE 9.
NOTE: Treestand should ALWAYS be fully assembled on
the ground prior to mounting it in the tree.
3
2
17
17
9
Summary of Contents for RE663
Page 6: ......
