Check for parts online at
www.HuntRiversEdge.com
or call 800-345-6007 M-F 8-5
8
Operator's Manual
LOCKDOWN WIDE Ladder Stand
ASSEMBLY INSTRUCTIONS
IMPORTANT ASSEMBLY TIP:
Do not tighten any nut and bolt combinations completely
until all parts are assembled together! Finger tighten plus
one turn of a wrench only! This will temporarily hold the
lock- nut on the bolt while helping alignment of all parts!
After all parts are assembled together, all nut and bolt
combinations must be completely tightened.
All assembly must be done in this order at ground
level before uprighting.
Do not remove labels/warnings from product, they are
there for your safety.
Recommended for adult use only.
STEP
1
STEP 2
5
mesh hidden for clarity
6
20
4
51
48
48
6
45
44
23
15
51
1. Attach front, middle, and rear platform sections
(4, 20 and 5) to J-tubes (6) using ten 1/4-20 x 3
IN bolts (48) and nuts (51).
2. Insert bottom tree blade (15) into ends of J-tubes
(6). Slide a strap guide (23) onto each J-tube (6)
and align with rear hole on each side. Secure
parts together using two 1/4-20 x 1-1/2 IN bolts
(44), two 1/4-20 x 1-3/4 IN bolts (45) and nuts
(51).
