Check for parts online at
www.huntriversedge.com
or call 800-450-EDGE (3343) M-F 8-5
13
Operator's Manual
Rivers Edge One-Man Ladder Stands
10. With all sections assembled together on ground, secure all sections together
using (6) provided 1/4-20 x 2-1/4” wing bolts with wing nuts and (2) provided
1/4-20 x 3-1/4” hex bolts with locknuts. The longer 3-1/4” hex bolts must be
used to connect the top ladder section and the assembled top platform
section. SEE fIGuRE 5.
11. a. Attach the stabilizer bar extension tube (1ML23) to the second ladder
section mounting bracket using (1) provided spring lock pin.
SEE fIGuRE 6.
b. Slide the stabilizer bar (L17) into the extension tube and attach the two
pieces together using (1) provided spring lock pin. Spring lock pin must go
through both the extension tube and stabilizer bar at appropriate hole to
achieve desired distance from tree. Adjustment in length may be needed
when ladder is uprighted later in instructions. SEE fIGuRE 6.
12. Tie one end of each of the provided 22’ ropes to the square tube side rails,
just in front of the welded tree blade. Be sure your double knots are secure.
SEE fIGuRE 7.
Figure 5
Figure 7
Figure 6
stabilizer bar
spring lock pins
extension tube
1/4-20 x 3-1/4" hex bolts
wing nuts
1/4-20 x 2-1/4
wing bolts
locknuts
