STEP 5
STEP 5
1. Attach the Magnet (H) to the bottom of top board (7) by inserting 2pc wood screw through the holes on the
Magnet (H) and tighten to the top board (7).
2. Screw in 4pc cam bolt (B) into the pre-threaded holes on the top board (7).
3. Attached the top board (7) to the upper left side panel (4) and upper right side panel (3) by inserting the cam
bolt (B) into the cam lock holes on the upper left side panel (4) and upper right side panel (3).
4. Inert 4pc cam lock (C) into the cam lock holes on the upper left side panel (4) and upper right right side panel
(3), then rotate clockwise to secure the cam bolt (B) in place by using a Philips screwdriver.
STEP 6
STEP 6
1. Screw in 4pc cam bolt (B) into the pre-threaded holes on the lower
left side panel (18) and lower right side
panel (17).
2. Attach 2pc lower section top cross bars (15) to lower left side panel (18) by insert the cam bolt (B) into the cam
lock holes.
3. Insert 2pc cam locks (C) into the cam lock holes on the lower section top cross bars (15), then rotate
clockwise to secure the cam bolt (B) in place by using a Philips Screwdriver.
4. Attach the rear lower cross bar (16) to lower left side panel (18) by insert the dowels into the holes on the
lower left side panel (18).
5. Attach the lower right side panel (17) to lower section top cross bars (15) and lower cross bar (16) by insert the
cam bolt (B) into the cam lock holes on the lower section top cross bars (15) and inert the dowels into the
dowel holes on the lower section top cross bar (15) and lower right side penal (17).
6. Insert 2pc cam locks (B) into the cam lock holes on the lower section top cross bars (15) then rotate clockwise
to secure the cam bolt (B) in place by using a Philips Screwdriver.
Summary of Contents for SOMERSET SPACESAVER06-040 XS
Page 3: ...PARTS LIST...
