RiverRidge SOMERSET SPACESAVER06-040 XS Assembly Instructions Manual Download Page 6

Page: 6 / 12

STEP 3

1.Attach right support board (13) to upper right side panel (3) by inserting 2 wood dowels (A) into dowel holes and

inserting 3 cam bolts (B) into cam lock holes in the upper right side panel (3).

2. Insert 3 cam locks (C) into the cam lock holes on the upper right side panel (3) then rotate clockwise to secure

cam bolts (B) in place by using a Philips screwdriver.

3. Repeat the above step to assemble upper left side panel (4) and right support board (14).

STEP 4

1. Screw in 2 cam bolts (B) into the pre-threaded hole on upper left side panel (4) and upper right side panel (3) .

2. Insert 8 wood dowels (A) into dowel holes on upper left side panel (4) and upper right side panel (3).

3. Attach the upper section cross bar (5) to upper left side panel (4) by inserting 2 wood dowels (A) into dowel

holes on the upper section cross bar (5).

4.Attach the shelf (6) to upper left side panel (4) by inserting 1 cam bolt (B) and 2 wood dowels (A) into holes on

the shelf (6), then insert 1 cam lock (C) into cam lock hole on the shelf (6) and rotate clockwise to secure the cam

bolt (B) in place.

5.Attach upper right side panel (3) to the upper section cross bar (5) and shelf (6) by inserting 4 wood dowels (A)

into holes on the upper section cross bar (5),shelf (6) and inserting cam bolt (B) into holes on the shelf (6).

6. Insert 1 cam lock (C) into the cam lock hole on the shelf (6) and rotate clockwise to secure the cam bolt (B) in

place by using a Philips screwdriver.

Summary of Contents for SOMERSET SPACESAVER06-040 XS












