STEP 3
1. Attach magnet (D) to cross bar (4) by inserting 2 screws (E) through holes on magnet (D)
and tighten to cross bar (4).
2. Insert 2 wood dowels (C) into wood dowel holes on left side panel (2).
3. Attach cross bar (4) and bottom board (8) to left side panel (2) by inserting wood dowels (C)
into wood dowel holes on cross bar (4) and bottom board (8).
4. Insert 3 cam locks (B) into cam lock holes on cross bar (4) and bottom board (8), then rotate
clockwise to secure cam bolts in place.
STEP 4
1. Attach door (6) to cross bar (4) and bottom board (8) by inserting door pin (K) into door pin
holes on cross bar (4) and bottom board (8).
