STEP 1
1. Screw 4 cam bolts (A) into cam bolt holes on top board (1).
2. Attach 1 metal bracket (F) to top board (1) by inserting 1 screw (X) through hole on metal
bracket (F) and tighten to top board (1).
3. Attach magnet plate (J) to door (6) by inserting 1 screw (G) through hole on magnet plate (J)
and tighten to door (6)
4. Attach 1 knob (M) to door (6) by inserting 1 screw (L) through hole on door (6) and tighten to
knob (M).
5. Insert 2 door pins (K) into holes on door (6).
STEP 2
1. Screw 3 cam bolts (A) into cam bolt holes on left side panel (2).
2. Attach drawer slide (T) to left side panel (2) by inserting 2 screws (S) through screw holes on
drawer slide (T) and tighten to left side panel (2).
3. Screw 3 cam bolts (A) into cam bolt holes on right side panel (3).
4. Attach drawer slide (U) to right side panel (3) by inserting 2 screws (S) through screw holes
on drawer slide (U) and tighten to right side panel (3).
