Riverlea Duratuf Garrison Sheds PL46, Assembly Instructions Manual

Page: 8 / 16

fig.2
ASSEMBLE DOOR
7
SELECT:
2 x 1.940 m Door Sheets (Narrow)
2 x 0.945 m Door Top/Bottom Flashings
2 x 1.940 m Door Side Flashings
3 x Hinges
1 x Padbolt Support Flashing
2 x 1.200 m Door Brace Flashings
59 x Rivets
STEP 1:
•
Lay out door sheets on a flat surface
making sure narrow pans are on the
outside.
•
Rivet sheets together in the centre
ensuring ends are flush with each
other.
STEP 2:
•
Position door side flashings
and top and bottom flashings
and assemble door as
shown, ensuring narrow face
of flashing is on the front as
per fig. 1
STEP 4:
•
On the back of the door, place door braces in posi-
tion as shown in fig.4.
•
Ensure that the top and bottom ends of the braces
are under the door flashings as shown in fig.5 and
opposite ends of the braces overlap in the middle.
•
Rivet door brace flashings onto back of door as
shown. Where possible, rivet from front of door .
STEP 3:
•
Attach hinges to door side flashing us-
ing rivets provided. Ensure hinge is flush with
back of door, and 60mm in from each end as per fig.2.
•
Using six rivets, attach padbolt support as shown in fig. 3.
NARROW PANS
fig.4
fig.5
Hinges
fig.2
fig.3
fig. 1