TF2048902-RG English
Page 13 of 16
20190611 V.2
3. Insert the Burner (7) into the cooker stand and through the cut-out opening on the side of
the stand.
Insert the threaded pin at the bottom of the burner into the center hole of the burner
bracket. Make sure the alignment pin seat in the notch on the edge of the burner bracket.
Align with the burner pins, then fix the Heat Shield (6) outside the supporting bar and
secure with the nut (on the threaded pin).
4. Insert the Regulator Hose Assembly (8) fitting into the burner and tighten. Be sure not to
strip threads on brass fitting. DO NOT OVERTIGHTEN. Proper connection is critical for
correct operation of the unit.
7
Nut
6
8
