manualshive.com logo in svg

RiverGrille GR2297801-RG-00, Assembly & Operating Instructions

Share
Download
RiverGrille GR2297801-RG-00 Assembly & Operating Instructions Download Page 36

                                                                             

  36  of 51 

                                                               

20190813-Ver.1.0

 

LIGHTING INSTRUCTIONS 

BEFORE LIGHTING 

 

WARNING 

  Inspect the gas supply hose prior to turning the gas 

ON

. 

  If there is evidence of cuts, wear, or abrasion, the hose must be replaced prior to use. 

  Do not use the grill if the odor of gas is present. 

  Only the pressure regulator and hose assembly supplied with the unit should be used. 

  Perform the “

LEAK TEST

” according to the instructions before operating the grill 

 

ALWAYS

 keep your face and body away from the burner while lighting. 

 
LIGHTING INSTRUCTIONS (Main Burner) 

1.  Read instructions before lighting. 
2.  Open the lid during lighting.   
3.  Make sure all control knobs are in the 

"

OFF

"

 position.   

 

4.  Turn ON gas valve from LP tank. 
5.  Light the 

IGNITION BURNER

 first. Push and turn burner control knob slowly to HI, burner 

should light immediately. 

 

6.  Once the IGNITION BURNER is lit, you may light the rest of burners. 

 

 

Summary of Contents for GR2297801-RG-00




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands