background image

XH2-240 Hardened Access Points

24

least a minimum distance as specified from the user in accordance to the regulatory guidelines 
which are designed to reduce the overall exposure of the user or operator.

The World Health Organization has stated that present scientific information does not indicate 
the need for any special precautions for the use of wireless devices. They recommend that if you 
are interested in further reducing your exposure then you can easily do so by reorienting 
antennas away from the user or placing the antennas at a greater separation distance then 
recommended.

FCC Guidelines for Exposure to Radio Waves

The device includes a radio transmitter and receiver. It is designed not to exceed the limits for 
exposure to radio waves (radio frequency electromagnetic fields) as referenced in FCC Part 
1.1310. The guidelines are based on IEEE ANSI C 95.1 (92) and include a substantial safety 
margin designed to ensure the safety of all persons, regardless of age and health.

As such the systems are designed to be operated as to avoid contact with the antennas by the 
end user. It is recommended to set the system in a location where the antennas can remain at 
least a minimum distance as specified from the user in accordance to the regulatory guidelines 
which are designed to reduce the overall exposure of the user or operator.

The device has been tested and found compliant with the applicable regulations as part of the 
radio certification process.

The US Food and Drug Administration has stated that present scientific information does not 
indicate the need for any special precautions for the use of wireless devices. The FCC 
recommends that if you are interested in further reducing your exposure then you can easily do 
so by reorienting antennas away from the user or placing the antennas at a greater separation 
distance then recommended or lowering the transmitter power output.

Industry Canada Guidelines for Exposure to Radio Waves

The Riverbed Access Points include radio transmitters and receivers. It is designed not to 
exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) as 

Separation Distance

MPE

Distance

Limit

1.34 mW/cm

2

31 cm

1.00 mW/cm

2

Separation Distance

MPE

Distance

Limit

1.34 mW/cm

2

31 cm

100 mW/cm

2

Summary of Contents for XH2-240



























Reviews: