Riverbed SteelCentral NetExpress, Installation Manual

Page: 25 / 38

SteelCentral™ NetExpress Appliance Installation Guide 21
Step 9 - Log into the web user interface Installing new software
Please enter the MGMT IP ADDRESS
ip/prefixlen: 2600:809:200:1a02:100:0:a26:8837/64
Please enter the GATEWAY IP ADDRESS
ip: 2600:809:200:1a02::1
Please enter the password for the mazu, dhcp, root, and admin shell users: ********
Please re-enter the password: ********
New Settings:
Product: SCNE-00470
IP Address: 2600:809:200:1a02:100:0:a26:8837/64
Gateway: 2600:809:200:1a02::1
NOTE: Setup will conclude with a reboot of this SteelCentral device. After all modules have
rebooted, setup can be completed by logging into the UI at
https://[2600:809:200:1a02:100:0:a26:8837]/
Login as admin/admin.
NOTICE: All existing settings and logs will be lost.
Finish Setup and Reboot? (yes/no): yes
Working.........
4. When the wizard completes and exits, the system reboots. Wait until the system finishes rebooting before
continuing with the next step.
Step 9 - Log into the web user interface
1. Using a system that is connected to the management network, point your web browser to the IP address you
specified in the configuration wizard in the previous step.
https://< NetExpress_IP_address >
2. Log in to the NetExpress user interface. The default credentials are:

User name: admin

Password: admin
The first time you log in to the NetExpress user interface, it displays the Setup page.
3. On the Setup page, ensure that all the required fields (marked with an asterisk) are filled in.
4. At the bottom of the Setup page, click Configure Now .
5. When prompted, enter a new password for the web user interface.
If NetExpress has an Internet connection, it will attempt to download licenses from the Riverbed Support site.
Alternatively, you can either add or download applicable licenses using the NetExpress Configuration > Licenses page.
Refer to
Chapter 6, “Licensing.”