RTC Series
RTC6500 Series Installation Guide
04-2017-A
www.rivatech.de
7
3. PART NAMES
①
Sunshield
It prevents the lens from getting the direct sunlight.
②
NTSC / PAL Button
The button switches the video output mode between NTSC and PAL.
Pressing the button will maintain the current video output mode unless pressing once more
to switch to the other mode.
③
Analogue Video Output
Connect a BNC output cable to see video via an analogue monitor.
④
RJ45 Socket
RJ45 LAN connector for 10/100 Base-T Ethernet (PoE supported).
⑤
Reset Button
Pressing this button reboots the camera or initializes the current settings of the camera to
the factory default settings. Refer to
6.3. Reboot
and
6.4. Factory Default
for the pressing
duration and more information.
⑥
Terminal Connectors for DI/DO
Connecting terminal blocks for digital input (sensor) and digital outputs (alarms)
Refer to
5. CONNECTIONS
for more information.
⑦
Terminal Connectors for Audio In/Out
Connecting terminal blocks for audio input (microphone) and audio output (speaker)
Refer to
5.CONNECTIONS
for more information.
⑧
Terminal Connector for RS-485
Connecting terminal blocks for RS-485
Refer to
5.CONNECTIONS
for more information.
NTSC / PAL Button
Analogue Video Output
Sunshield
RJ45 Socket
Screw &
Plastic Anchor-3pcs
Quick Installation Guide
CABEL CORE
[ Camera Profile Image ]
[ Back Panel of Camera ]
Reset Button
Terminal Connectors
for DI/DO
Terminal Connectors
for Audio In/Out
Terminal Connectors
for RS-485
* The model herein and its appearance are subject to change without any prior notice.
Terminal
Connectors
for power adaptor
