4
www.rivatech.de
Step3. Set the lens position
1) Remove the dome cover.
2) Adjust the lens to the desired position by manually moving its body in the following
directions. After adjustment, fasten the screw of the rotation axis.
Connect to the web page of the device to see its real-time image. Refer to
step
6.
Configuration
for details about using its web page.
4) Unscrew the focus puller by turning it counterclockwise. Move it left or right and
adjust the image focus. After the setting, tighten the focus puller again by turning it
clockwise.
Zoom puller
Focus puller
B. Pan the lens bottom
holder
C. Tilt the lens
A. Rotate the lens
3) Unscrew the zoom puller by turning it
counterclockwise. Move it left or right
and set the lens to the desired zoom
position. After the setting, tighten the
zoom puller again by turning it
clockwise.
